Return to
Snow Joe Support Knowledge Base Snow Joe Knowledge Base
How should I maintain and store my Cordless Power Pruner?
Joe's Assistant
1 months ago


  1. If the cordless pruner requires cleaning, do not use solvents to clean it. Only use a moistened soft cloth. Never let any liquid get inside the tool; and never immerse any part of the tool into any liquid.
  2. Apply oil around the center bolt and open and close the tool about 10 times to work it in. Use the steel wool to rub the oil over the cutting surfaces. Spray the tool with alcohol and wipe with a paper towel.
  3. Inspect the product before each use for worn and damaged parts. Do not operate it if you find broken and worn parts.

WARNING! Always switch the product off and let the product cool down before performing inspection, maintenance, and cleaning work.


  1. Fully charge the battery
  2. Clean the product as describe above
  3. Make sure that the blade lock knob is in the lock position, then assemble the blade cover over the blades
  4. Store the tool in a secure and dry location. The storage temperature must always remains in the range of 41°F (5°C) to 104°F (40°C)
  5. Before using the tool after prolonged storage, fully recharge the battery
Was this article helpful? 0 0
More questions? Submit a request

PJ3600C Related Articles

Will this unit come with a battery and charger?
How do I fit and change the blade?
How should I maintain and store my Cordless Power Pruner?
How do I correctly use my Cordless Power Pruner?

We're Here to Help