Return to
Snow Joe Support Knowledge Base Snow Joe Knowledge Base
How should I maintain and store my Cordless Wheelbarrow?
Joe's Assistant
1 months ago


  • Always be sure to park the machine on flat ground and lock the brake lever before storage or attempting to perform inspections or maintenance.
  • Always turn off the unit and remove the safety key and battery pack before storage, inspections, or maintenance.
  • When servicing, use only identical replacement parts. Use of any other parts could create a hazard or cause product damage.
  • The wheelbarrow should be kept clean, dry. Use running water to clean the outside of the unit and remove mud and dirt. Wipe dry with a piece of cloth.
  • Never use gasoline, benzine, thinner, or alcohol to clean the wheelbarrow. It may cause discoloration, deformation or cracks on the unit.
  • Do not use a pressure washer to clean the unit. Water can penetrate tight areas of the machine and cause damage to spindles, gears, bearings, or the engine.


  • Remove the battery pack and the safety key. Clean and check the wheelbarrow as described.
  • If needed, remove the handle knobs securing the two handles and turn handles backwards to save more space. Replace the hand knobs and tighten to secure the handles.
  • Store the wheelbarrow with the safety key, the battery and the charger in a safe place out of reach of children. Engage and lock the brake lever.
Was this article helpful? 0 0
More questions? Submit a request

24V-WB1000 Related Articles

Will my old Plug-in charger (ICHRG24-AC) work with my new battery?
Is the battery fully charged?
How should I maintain and store my Cordless Wheelbarrow?
How do I adjust the brake on my Cordless Wheelbarrow?
How do I correctly dump objects from my Cordless Wheelbarrow?

We're Here to Help