How do I properly use the Multi-Surface Vacuum?

Joe's Assistant
17 months ago

Before using the window vacuum, wet the surface to be cleaned with sprayer. Or use a sponge filled with water or proper detergent to wipe the surface.
Grab the window vacuum cleaner by the handle. Place the squeegee blade against the upper part of the surface to be cleaned.
Turn on the window vacuum cleaner by squeeze the On/ Off switch.
With a little pressure applied, slide the squeegee along the surface. The appliance will vacuum all the liquid and leave a clean and smooth surface.
After the vacuuming is done, shut off the appliance by pressing the On/Off switch again. If there's still water residual left on the surface, wipe with dry cloth.

Was this article helpful?

Snow Joe Support Knowledge Base Snow Joe Knowledge Base