Why does the SPX series motor not start?

Joe's Assistant
57 months ago

Cause	Solution
On/Off switch is in the "OFF" position.	Turn switch to the "ON" position.
Power cord is not plugged in.	Plug in power cord.
Extension cord is too long. Extension cord is not proper gauge. Extension cord is damaged.	Use unit without an extension cord, or replace extension cord with a 25' (7.6 m) or shorter, 14/3 gauge or thicker, outdoor-rated extension cord.
Electrical outlet does not supply adequate power.	Try a different outlet.
Tripped pressure washer GFCI circuit breaker.	Reset the GFCI and retry the unit.

Was this article helpful?

Snow Joe Support Knowledge Base Snow Joe Knowledge Base