Return to
Snow Joe Support Knowledge Base Snow Joe Knowledge Base
Why is there no detergent coming out?
Joe's Assistant
43 months ago
Cause Solution
Detergent container is empty. Add more detergent.
Detergent bottle or suction tube not properly connected. Check connections.
Detergent is too thick. Dilute detergent.
Clogged detergent tube. Remove obstruction or run distilled white vinegar through detergent tank.
Discharge nozzle is obstructed. Blow out or remove debris with the needle clean out tool.
Using a 3rd-party nozzle. Use black soap nozzle found in our Sun Joe Electric Pressure Washer Quick-Connect Spray Tip Set (SPX3000®-TPS).
Was this article helpful? 0 0
More questions? Submit a request

SPX3000 Related Articles

Why isn't my unit reaching high pressure?
My pressure washer is leaking from where the garden hose goes into the pressure washer.
Why does the motor buzz and fail to run?
How do I assemble my SPX3000® Pressure Washer?
How do I winterize my pressure washer?
Do you make a brass connector for my pressure washer?
Why does the SPX series motor not start?
Why does the pressure vary from high to low?
Does my SPX3000® pressure washer have a downstream or upstream detergent injector?
Why does the garden hose connection adapter leak?
Can I use an aftermarket spray nozzle with the quick connect wand?
What kind of pump and motor does my unit have?
What size thread/length is the pressure hose?
Why is there no detergent coming out?
Can my unit be connected to a portable water supply?
What is the life expectancy of the pump found in my unit?
What size screws do I need to assemble my SPX3000®?
I just got my pressure washer, and I am missing the needle clean out tool.
What is the orifice size of the nozzles included with my pressure washer?
Are there recommended detergents to use with my pressure washer?
How many washes can my SPX3000® handle?
Can I use disinfectants as detergent with my pressure washer?
Does my SPX3000 pressure washer have a downstream or upstream detergent injector?

We're Here to Help